The DHB pump series is a range of compact designed vertical, in-line, centrifugal pumps having a minimum of parts to facilitate easy maintenance. Pumps are fitted with a spacer coupling allowing good access during inspection and service and enabling removal of the rotating element without disturbing the motor/driver.

The pump series, designed for medium usage, features a separate single bearing arrangement for the rotating element and allows assembly with a range of IEC standard electric motors.

The CNLB pump series is a range of vertical, in-line, centrifugal pumps with flexible coupling (top pull out) providing easy access for inspection and service without disturbing the motor/driver or surrounding pipe system.

The pump series, designed for heavier and continuous duties, features a separate double bearing arrangement for the rotating element and allows assembly with a range of IEC standard electric motors.

Special pump covers can replace the standard pump cover for special applications.

The QV pump series is a range of vertical, in-line, axial split, centrifugal pumps of single or multi stage design. The design provides easy access for inspection and service without disturbing the rotating element, the motor/driver or surrounding pipe system.

The pump series, designed for high efficiency and low NPSH under heavier and continuous duties, features a separate double bearing arrangement for the rotating element, an axially balanced rotating element and allows assembly with a wide range of IEC standard electric motors.

The pump series can be provided with a range of shaft seals for media temperatures up to 180°C and can be supplemented with various types of priming systems according the application.

The QT pump series is especially designed for applications where heavy capacities, low pressure heads and two-way operation are of vital importance. The pump, focused for heeling duties in the marine sector, is also well suited for condenser cooling services.

Depending on operational requirements, the pump can be supplied as a single or multi staged propeller pump, where the propeller is driven in a direct line via a flexible coupling to a range of IEC standard electric motors. The pump design affords a strong and robust construction suitable for placement in places where accessibility is difficult. The QT pumps simplicity allows ease of inspection and maintenance.

The CNL pump series is a range of vertical, in-line, centrifugal pumps with flexible coupling (top pull out) providing easy access for inspection and service without disturbing the motor/driver or surrounding pipe system.

The pump series features direct coupling between the rotating element and motor which is selected from a range of IEC standard electric motors.

Bare shaft end suction back pull out pumps.

Common base plate for pump and driver including guarded flexible coupling supplied upon request.

Vertical or horizontal pumps. Pump casing and cover: close-grained cast iron or bronze. A minimum of space required for mounting.

Double acting piston pump for boiler feed, hydrophore, bilge, oily bilge, and other water supply service. Maximum discharge head: 14 kg/ cm2.

Temperatures up to 100 degrees C. Certificate from any Classification Society available.

Bare shaft end suction back pull out pumps. Common base plate for pump an driver including guarded flexible coupling supplied upon request.

The CVLS vertical turbine pump is designed for a very wide range of applications. The construction is based on a module concept.

Number of column pipes and stages, types of impellers and bowls, sealing systems, bearing arrangements, and the material selection will meet any requirement within its working area.

The QH pump series is a range of horizontal, in-line, axial split, centrifugal pumps of single or multi stage design. The design provides easy access for inspection and service without disturbing the rotating element, the motor/driver or surrounding pipe system.

The pump series, designed for high efficiency and low NPSH under heavier and continuous duties, features a separate double bearing arrangement for the rotating element, an axially balanced rotating element and allows assembly with a wide range of IEC standard electric motors.

The pump series can be provided with a range of shaft seals for media temperatures up to 180°C and can be supplemented with various types of priming systems according the application.

The BDV pump series is a range of twin cylinder, double acting, piston pumps.

The pumps robust construction, reliability and performance supersedes many other pump types of modern design.

The pump series, designed for heavy duty operation, features geared connection between the crank and motor which is selected from a range of IEC standard electric motors. The gearing enables a considerable flow selection with each model.

BDV/BDVH piston pumps are well suited for applications where self priming is required and the robust construction offers the user a high degree of security.

Self priming Centrifugal Pump. Bare shaft pumps. Integral priming and air separation. No valves or external by-pass piping of priming. One unit casing.

Self priming Centrifugal Pump Horizontal pumps.

Integral priming and air separation. No valves or external by-pass piping of priming.

One unit casing.